ATV Mount for Fish Finder GPS unit, Handlebar mount for ATV

[stickbow]

Merry Christmas everyone.

I'm sure this has been asked before but can anyone recommend a mount to mount a Lowrance HDS 7 fish finder GPS unit to the handlebars of an ATV. Prefer to have a flat bar between both handle bars that a RAM mount can be mounted to.
Thanks in advance for any help

[Fisherman]

I've never seen a double mount but, if you get 2 of these, then you can put one on each side terminating under the FF bracket RAM mount

[sabmgb]

Sounds like you already have the ram mount and are looking for a special bar to go between the handle bars. you probably have to get the bar custom made. If you don't have the ram mount I'd check radio world, this is where I get all my ram mounts, they have had everything I have needed.

[stickbow]

Thanks Guys. I'll check out Radio World after the holidays.

[stickbow]

Thanks Guys. I'll check out Radio World after the holidays.

[Smilee]

I use what Fisherman described. Works like a dream…. Also mounted a separate ball on my snowmobile so I can transfer unit to it as well.

[ohno50]

I use what Fisherman suggested as well...works like a dream on the snowmobile. I have it mounted to the handlebar

[longfish]

I use my Helix ten on the ATV in the hut.....On two different boats and I use the standard mounting bracket for it.....I have a wood box for my gear on the ATV and attached a bracket on that. The box also breaks the wind and I strap my auger on top of it so I can keep a eye on it too, and not loose it. I run it off a 9AH Milwaukee battery with a adapter on it....battery is in the box.

[longfish]

Pic 2

[sabmgb]

longfish, your box looks like mine. I like the way you mounted the fishfinder. I made mine to fit what I use in side.heater tank, and fishing equipment. put hooks on the side that I can hang buckets off. your right on with putting auger on front and finder you can keep eye on them as you drive. heard to many people saying how they lost the auger or parts of it.