Eyoyo camera parts, Might be time

Got about 5 years out the Amazon special eyoyo fishing camera. Got water in the fishy so she’s not too happy tonight. Anyone have luck getting replacement parts anywhere for these or just time to buy a new one? The screen and everything else is great. Can’t seem to find a place to just buy a new camera and cable to plug in.

Try a search on eyoyo....not too long ago there were some posts and threads on this exact issue....someone posted a name and service number as well.

Thanks I just found the post. Will try the website but not too confident. Thanks for the direction tho.

Your welcome....happy I could help.

Arnie

I bought an Aqua view stealth model. 3 trips was fine. Today get out with the little guy and it’s all blurry. Thought it was the water. But something was off. Pull the cam out of the water and the camera had moisture inside the camera housing. You did good for 5 years. Lol

Mine got water in the fish camera after being 30 fow for about 2 hours. Never worked properly after.
Ordered a replacement on Amazon.

I bought 2 cameras and had 2(7 " Screens). Wired them all together and made a side by side camera with 180 degree view

Tip. I put underwater silicone on the side of the lens, around the screw on lens cap, and any other hole water could get in.

Good luck

that sounds pretty awesome! thanks for the insight. that one seems to be only available in 15M cable tho.

You can fix the one you have. I did mine (even though Eyoyo sent me a warranty replacement, so I have two cameras now).

Just unscrew the lens cap, let the camera parts and glass dry, you can then screw the lens cap back and apply silicone around the edge. If you don't use infrared lights, you can remove the circular shaped light circuit board from the camera casing and fill the space with some dessicant before re-installing the cap. The dessicant will absorb the moisture from the air in the camera casing and prevent fogging in cold water.

ya i had mine all apart and let it dry right out, still had no image to speak of. i bit the bullet and bought a new one.
thanks for the help tho

have the same problem and just buy a new one

If you had enough water in the camera that might have shorted a circuit, in which case the only option is to replace it, unless you're an electronics nerd with a lot of patience