Ice shack advice, Sheeting

[jignhookz]

Thanks for the replies everyone.
I bought some tin today and got started. I am not to keen on the roll aluminum, it kinks and has waves. I tried rolling in the opposite direction and compressing with weight.
I also did some staining. The roof and some walls.
Some pics.

[jignhookz]

Roof stained with deck stain.

[justafishin]

A word of caution. Sunlight reflecting off that shiny aluminum can melt a hole beside the hut if left in one spot too long. I have seen it firsthand on a friends hut.

[Hunterman]

OSB can work too.
If it’s too light and you’re leaving it out
Then the wind can do a number to it.