piranhamax 160 question

[toothhealer88]

HELP Any info on the settings would be appreciated.Had the sensitivity setting on 2 (119 ft Kbay) but am not convinced this was correct.Tried dif settings but was not seeing my lure working.TIA alan

[Great north]

Did you zoom in
When I use my I need to zoom in

[Woodsman]

What freq were you using? 200 or 83?
In that bay the current can be quite strong at times & at 119 ft you most likely were not in the transducer cone.
Try a heavier lure to see if it improves your results or if you can determine the direction of the current move the transducer over 10-20 ft & see if this helps.
Increasing the sensitivity should also help.

[Livebaitjr]

I've got the same unit you gotta turn the sensitivety to almost max I usually have it at 8 or 9 and use the black bottom feature. Fish hugging bottom will look like little bumps you can also zoom in

[toothhealer88]

Thanks for the input ,I'll check those things you all mentioned tonight.Regards Alan

[richyb]

I run mine at max sensitivity and once my lure gets within 20 feet of bottom i use the zoom. You will have to move your transducer around a bit on different angles to mark your lure.